寶力機械有限公司

產品介紹

加工時間減少到極限的機械系＆控制系設計
• 通過獨立控制的對向梳狀刀型刀架台佈局、實現了旋削、銑削等的同時加工。
• 搭載帶Y軸控制的背面專用8軸型刀架台。擴充正面/背面的獨立加工範圍、並大幅度縮短加工時間。
• 獨自的控制技術STAR動作控制系統，縮短非切削時間。

Item			SW-20
Max.machining diameter			ø20mm(25/32in)
Max.headstock stroke			205mm(8in)
Tool post configuration		Front	Turning tool + Power-driven tool
Tool post configuration		Rear	Turning tool + 4-spindle sleeve holder+ Power-driven tool
Turning tools		Front	4 tools (□12mm / □16mm)
Turning tools		Rear	2 tools (□12mm / □16mm)
4-spindle sleeve holder	Number of tools		Front : 4 tools Rear : 4 tools
	Max.drilling capability		ø10mm(25/64in)
	Max.tapping capability		M8×P1.25
Power-driven att.	Number of tools	Front	3 tools
	Number of tools	Rear	3 tools
	Max.drilling capability		ø8mm(5/16in)
	Max.tapping capability		M6×P1.0
	Spindle speed		max.8,000min^-1
	Drive motor		1.0kw(Continuous) / 1.2kw(5min./30%ED)
Rapid feed rate			35m/min(Y1,Z1,X2,Z2,Y3) , 20m/min(X1,Y2,X3,Z3)
Main spindle indexing angle			C-axis control
Main spindle speed			max.10,000min^-1
Main spindle motor			2.2kw(Continuous) / 3.7kw(10min./25%ED)
Dimensions (W×D×H)			2,588×1,300×1,765mm
Weight			3,400kg
Power consumption			4.8KVA

Item			SW-20
Max.chucking diameter			ø20mm(25/32in)
Max.length for front ejection			80mm(3-5/32in)
Max.work projection length			30mm(1-3/16in)
8-spindle unit	Number of tools		8 tools
	Max.drilling capability	Stationary tool	ø10mm(25/64in)
	Max.drilling capability	Power-driven att.	ø8mm(5/16in)
	Max.tapping capabilily	Stationary tool	M8×P1.25
	Max.tapping capabilily	Power-driven att.	M6 ×P1.0
Sub spindle indexing angle			C-axis control
Sub spindle speed			max.10,000min^-1
Sub spindle motor			2.2kw(Continuous) / 3.7kw(10min./25%ED)