FEATURES – Elimination of solder skip deffect of SMC’s by uniformly pressuvized primary wave. – The soldering machine can be lowered in total height.––Enabling the operator to ensure effective monitoring of the process. – The horizontal type can realize an in-line soldering machine system.––Rack to Rack.Path line height : 1000mm – Installation of a large window on the upper section of the conveyor enhances maintenance procedures. – Attaching gas springs to the spring-up door open enhances maintenance procedures. – The adoption of casting claws for lead-free. – Motor-driven lifter is mounted on solder tank up/down adjusting and drawing-out mechanism. -Adoption of a Special nozzle inclined at 45° -Elimination of soldering bridges by stabilizing the peel back point. SPECIFICATIONS Applicable boards | MAX W250×L350×t1.6 (mm) MIN W50×L120×t0.6 (mm) | Inclined angle of conveyor | 0°(Horizontal transfer) | Conveyor speed | 0.4 – 2.5 m/min | Dimensions of machine | W1220×L3300×H1450(mm) | Weight (Excluding solder) | approx.1750kg | Soldering capacity (Sn-Pb) | approx.420kg | Power source | AC 200V-50/60Hz-3φ 25kVA | N2Gas supply | 99.99% 0.5∼0.7MPa |
OPTIONAL UNITS Substrate’s bend protective fitting Automatic solder supply unit Automatic conveyor width controller P.C.B.s skip detector P.C.B.s falling detector Flux fume recovery unit Oxygen deficiency alarm | SOLDER BATH INCLINED 45° -Adoption of a Special nozzle inclined at 45° -Elimination of soldering bridges by stabilizing the peel back point. ELECTROMOTIVE LIFTER -Adoption of a very accurate electromotive lifter COLOR OPERATION PANEL |