Description
Teaching operation can be done on the computer, a sharp increase of the laser processing machine availability.
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Support 3 d laser processing of a series of processes, from preparation to the actual processing.Equipped with a mid – range 3 d CAD functions, can input all kinds of 3 d CAD data.Can use the 3 d model is developed to used to support the machining fixture.
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
3 d laser processing machine corresponding to the mitsubishi electric VZ series, HT series, can carry on the precision of the interference check according to the 3 d model.And with the company CamMagic DM, high CamMagic LA compatibility.
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
This model can output is suitable for the new type of processor VZ10 / VZ20 NC data.
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
(1) based on 3 d model, cause or peripheral hole processing route.
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
(2) only need to specify the parameters and the shape of a position to prepare the jig, can greatly shorten the time required to prepare the jig.
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
(3) can be achieved by analogy to the demo to check the processing head and interference of artifacts (collision, close).
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
(4) standard equipped with mitsubishi motor is at the same level of laser processing machine parts model data.
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
(5) new processor VZ10 / VZ20 model can pass between the nozzle and the workpiece automatically set for the Angle of tilt information processing speed, thus to improve the machining surface between nozzle and not vertical location (interference avoidance and groove processing, etc.) the processing quality.CamMagic TL – II the output nozzle of tilt information, can shorten the time of the processor used to modify velocity, frequency and reduce bad processing.
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
6, and processor speed setting same program was carrying can set is the same as the processor speed of the operation.
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
